What are the 4 steps in using a fire extinguisher

How to Use a Fire Extinguisher Learn the PASS System. For an easy-to-remember 4-step process to operating a fire extinguisher, learn the PASS system: Pull the pin while holding the extinguisher away from you to unlock the mechanism. Aim low toward the base of the fire. Squeeze the lever slowly. Sweep the nozzle from side to side at the base of the fire.

A fire extinguisher works by developing a chain reaction. When it is triggered, the chemical reacts with anything combustible that it comes into contact with. In the case of a fire, the response will launch oxygen which will trigger the fire to stress out. The end result is that the fire will certainly quit melting and also will ultimately go …

4 Simple Steps to Use a Fire Extinguisher At Work – Safety

OSHA requires employees to be trained in fire extinguisher use on an annual basis, at a minimum. A simple 4 step fire extinguisher training technique to use with employees is the PASS method: P ull the pin on the extinguisher A im the hose nozzle low toward the base of the fire

Also Check:  Where to dispose of old fire extinguishers near me

People Also Ask what are the 4 steps in using a fire extinguisher

How to use a fire extinguisher safely and effectively?

Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.

What do you do in three steps for a fire?

What to Do in Case of a FireImmediately pull the nearest fire alarm pull station as you exit the building.When evacuating the building, be sure to feel doors for heat before opening them to be sure there is no fire danger on the other side.If there is smoke in the air, stay low to the ground, especially your head, to reduce inhalation exposure. …

Also Check:  What type of fire extinguisher should be used on gasoline

More items…

Do you know how to properly use a fire extinguisher?

To use a fire extinguisher, start by grabbing the small ring on the handle and pulling on it to remove the pin. Then, aim the hose at the base of the fire and squeeze the 2 levers at the top of the extinguisher together to release the extinguishing agent. Sweep the hose from side to side while continuing to point the hose at the base of the fire.

Which fire extinguisher should I use?

What Type of Extinguishers Are There?Water Fire Extinguishers. When tackling a fire in the home where the fuel is paper or wood, using a water extinguisher is good as it drenches the material and eliminates …Foam Fire Extinguishers. …Carbon Dioxide Fire Extinguisher. …Wet Chemical Fire Extinguisher. …Dry Water Mist Extinguishers. …Dry Powder Extinguishers. …

Also Check:  Where to store fire extinguisher on 12m boat

People Also Searches what are the 4 steps in using a fire extinguisher

fire extinguisher how to operate
fire extinguisher use instructions
fire extinguisher steps pass
how to use a fire extinguisher pdf
using a fire extinguisher
fire extinguisher use in order
fire extinguisher how to operate
fire extinguisher use instructions
fire extinguisher steps pass
how to use a fire extinguisher pdf
using a fire extinguisher
fire extinguisher use in order

How to Use a Fire Extinguisher Using the PASS Method Video Answer

Leave a Comment