Class D Fires – Extinguish with Dry Powder Agents. Fires sparked by combustible metals are known as Class D fires. Titanium, magnesium, sodium, …
Fire is classified into four main classes – Class A, Class B, Class C, and Class D. Class A: This class includes all the common solid combustible things such as wood, cloth, paper, plastics, etc. Class B: It includes flammable liquids that are usually extinguished by smothering. For example oil, grease, gasoline, alcohol, etc.
Extinguishing a fire the right way! – Fire safety – Guide
Attack a fire in the direction of the wind. Extinguish liquid fires and fires caused by dripping substances from the top down. Extinguish wall fires from the bottom up. Use several fire extinguishers at once, not one after another. Take account of any back draft. Replace fire extinguishing spray after use.
People Also Ask how to extinguish a fire
How do fire extinguishers help stop a fire?
Pull – Pull the safety pin and break the tamper seal.Aim – Aim the nozzle of the extinguisher towards the fire and aim low.Squeeze – Gently start squeezing the handle on top to release the extinguishing agent.Sweep – Move the hose in a sweeping fashion and keep aiming at the base of the fire until it is put off. …
How to stop a fire without a fire extinguisher?
What Can I Use Instead Of A Fire Extinguisher?Heavy Blanket. For smaller, localized fires in one room, you can choke out the fire’s oxygen with a heavy blanket. …Baking Soda. You can also use baking soda. …Dirt Or Sand. If a fire starts outside of your home, for example in a fire pit, there’s no need to run inside to look for something to put out …
What are the steps of using a fire extinguisher?
There are four basic steps to using a fire extinguisher.Pull. Place the extinguisher on the floor. Hold it by the tank (pressure on the handle could pinch the pin). Pull the pin straight out.Aim. Start 10 feet back from the fire. Aim at the base of the fire.Squeeze. Squeeze the lever on the fire extinguisher.Sweep. Sweep from side to side, moving in slowly until the fire is out.
How to use fire extinguisher correctly?
Using a fire extinguisherPull: Pull the pin, this will break the tamper seal.Aim: Aim low, pointing the nozzle or hose at the base of the fire. …Squeeze: Squeeze the handle to release the extinguishing agent.Sweep: Sweep from side to side at the base of the fire, the fuel source, until the fire is out.
People Also Searches how to extinguish a fire
|ways to extinguish a fire|
|how to contain a fire|
|how to extinguish fire pit|
|grease fire how to extinguish|
|how to stop fire|
|putting out a fire pit|
|5 types of fires|
|extinguishing fire methods|